Flooring in Gold River, CA
LVP, laminate and engineered hardwood for Gold River homes, supplied and installed by KONO. Itemized price before we visit.
- Itemized price before we visit
- Free in-home measure
- Nothing due until you approve the quote
- Old floor out from $0.50/sqft
Installation services and labor rates
Gold River is a planned community of 25 villages, built mostly in the 1980s and 90s. Labor rates are published below.
LVP installation$2.35/sqft labor · $4.55/sqft installed with materialRigid-core vinyl plank over slab or plywood, with the pad bonded to the plank.
Laminate installation$2.25/sqft labor · $5.35/sqft installed with material14 mm click laminate floated over a vapor barrier.
Engineered hardwood installation$4.35/sqft labor · $9.34/sqft installed with materialReal oak, floated or glued down depending on the subfloor.The rest of the job, priced up front
- Carpet, vinyl or laminate removal
- $0.50/sqft
- Tile removal
- $3.50/sqft
- Haul-away
- $150 per truck, about 600 sqft
- Baseboard, new or reset
- $1.60/ft
- Transition strips
- $20 each
- Stairs
- from $85/step, $150 in hardwood
- Furniture moving
- $100 per heavy piece
- Delivery of KONO material
- $300
Subfloor leveling is priced at the measure, after we see the slab or plywood. Same rates as the flooring calculator.
What every KONO install includes
- Moisture testEvery slab is tested before LVP or wood goes down.
- AcclimationWood floors sit in your house before install, so they match your air.
- UnderlaymentThe right pad or vapor barrier for the floor and the subfloor.
- Expansion gapsThe gap the maker specifies, hidden under the baseboard.
- Trim and transitionsBaseboard, thresholds and stair edges finished to match.
- Cleanup and haul-awayOld flooring, boxes and offcuts leave with the crew.
Price your Gold River home
Gold River homes by decade built. US Census Bureau, American Community Survey 2023, 5-year estimates.
Before 1960
Gold River was planned in the late 1970s; almost nothing here is older.
Built before 1981: old vinyl tile and black adhesive are tested for asbestos before anything is pulled up.
1960s and 70s
Planning began in the late 1970s.
Built before 1981: old vinyl tile and black adhesive are tested for asbestos before anything is pulled up.
1980s and 90s
Most of Gold River went up in the 1980s and 90s, in 25 villages.
- 1984Sutter Villagehomes from 1984 and 1985
- Discovery Villageone of the 25 villages
Some villages have duplexes, triplexes and condos with shared floors. Ask your HOA about underlayment rules before you order; we send the product spec sheet.
2000s
About 330 homes after 2000.
2010 and newer
Gold River is essentially built out.
Serving Gold River and nearby
All of Gold River, ZIP codes 95670. Free in-home measure, the same prices as everywhere in the Sacramento area.
Neighborhoods
- Sutter Village
- Discovery Village
Nearby cities
Floors we would put in a Gold River house
Gold River summers run hot. Floors feel it.
- 20 daysa year above 100°F
Rigid-core LVP keeps its shape in that heat when the expansion gap is right.
- 45% to 82%humidity, summer to winter
Engineered oak sits in your house first, so it moves with your air.
- Sunthrough west and south glass
Direct sun heats a floor past the air temperature. A shade helps any floor.
Installing floors in Gold River homes
Gold River is a planned community of 3,701 homes on the American River just west of Folsom, laid out in 25 villages. Most homes were built in the 1980s and 1990s, and 87% are owner-occupied.
Half of Gold River households include someone 65 or older, the highest share on our list. One continuous floor, no thresholds and an attached pad for a quieter step make sense here.
The villages have HOAs, and some include duplexes and condos with shared floors. If yours does, we send the product spec sheet your association asks for before work starts.
Replacing a floor covering needs no permit under Sacramento County rules. Summers reach 100°F on about 20 days a year.
Gold River flooring questions
Do I need a permit to replace flooring in Gold River?
No. Gold River is unincorporated, and Sacramento County's permit guide lists painting, papering, tiling, carpeting, cabinets, counter tops and similar finish work as exempt. HOA rules still apply in the villages.
How much does it cost to install 1,000 sq ft of flooring in Gold River?
With our rates and carpet coming out: about $7,090 for LVP, $7,320 for laminate and $13,160 for engineered hardwood, including material, installation, baseboard, transitions, haul-away and delivery. 2,000 sq ft of LVP replacing builder tile runs about $19,880. The final number comes from the measure.
Do you remove the old floor?
Yes. Carpet and pad, sheet vinyl, LVP and laminate come out at $0.50 per sq ft; tile is $3.50 per sq ft. Haul-away is $150 per truckload of about 600 sq ft.
How much do I pay up front?
Nothing on the website. For installation, California caps the down payment at $1,000 or 10% of the contract, whichever is less, and the rest is paid as work is done.
Is LVP a good idea with Gold River summers?
Yes, if it is rigid-core and installed with the expansion gap the maker specifies. Floors next to big west- or south-facing glass get the most heat; shades help any floor last.
Get a free quote for your Gold River home
Leave a name and a number. We text you to pick a time for the free measure, bring samples of the floors you like, and send the written quote after the visit.