Flooring in Cameron Park, CA
LVP, laminate and engineered hardwood for Cameron Park homes, supplied and installed by KONO. Itemized price before we visit.
- Itemized price before we visit
- Free in-home measure
- Nothing due until you approve the quote
- Old floor out from $0.50/sqft
Installation services and labor rates
Cameron Park homes are mostly from the 1970s and 80s, in the foothills above the valley. Labor rates are published below.
LVP installation$2.35/sqft labor · $4.55/sqft installed with materialRigid-core vinyl plank over slab or plywood, with the pad bonded to the plank.
Laminate installation$2.25/sqft labor · $5.35/sqft installed with material14 mm click laminate floated over a vapor barrier.
Engineered hardwood installation$4.35/sqft labor · $9.34/sqft installed with materialReal oak, floated or glued down depending on the subfloor.The rest of the job, priced up front
- Carpet, vinyl or laminate removal
- $0.50/sqft
- Tile removal
- $3.50/sqft
- Haul-away
- $150 per truck, about 600 sqft
- Baseboard, new or reset
- $1.60/ft
- Transition strips
- $20 each
- Stairs
- from $85/step, $150 in hardwood
- Furniture moving
- $100 per heavy piece
- Delivery of KONO material
- $300
Subfloor leveling is priced at the measure, after we see the slab or plywood. Same rates as the flooring calculator.
What every KONO install includes
- Moisture testEvery slab is tested before LVP or wood goes down.
- AcclimationWood floors sit in your house before install, so they match your air.
- UnderlaymentThe right pad or vapor barrier for the floor and the subfloor.
- Expansion gapsThe gap the maker specifies, hidden under the baseboard.
- Trim and transitionsBaseboard, thresholds and stair edges finished to match.
- Cleanup and haul-awayOld flooring, boxes and offcuts leave with the crew.
Price your Cameron Park home
Cameron Park homes by decade built. US Census Bureau, American Community Survey 2023, 5-year estimates.
Before 1960
Larry Cameron bought the land in the 1950s; it was ranch land then.
Built before 1981: old vinyl tile and black adhesive are tested for asbestos before anything is pulled up.
1960s and 70s
Cameron Airpark Estates came in 1963 and the man-made lake in 1968.
- 1963Cameron Airpark Estatesresidential airpark
- 1968Cameron Park Lakeman-made lake, improved from 1968
- 1963El Dorado Royalegolf course community
Built before 1981: old vinyl tile and black adhesive are tested for asbestos before anything is pulled up.
1980s and 90s
The 1980s were the busiest decade: 2,671 homes.
Foothill winters bring about 14 frosty nights: wood floors are acclimated in your house first, and LVP gets its full expansion gap.
2000s
About 1,500 homes after 2000.
2010 and newer
Little new building since 2010.
Serving Cameron Park and nearby
All of Cameron Park, ZIP codes 95682. Free in-home measure, the same prices as everywhere in the Sacramento area.
Neighborhoods
- Cameron Airpark Estates
- Cameron Park Lake
- El Dorado Royale
Nearby cities
- El Dorado Hills
- Shingle Springs
- Placerville
- Rescue
- Folsom
Floors we would put in a Cameron Park house
Cameron Park summers run hot. Floors feel it.
- 22 daysa year above 100°F
Rigid-core LVP keeps its shape in that heat when the expansion gap is right.
- 40% to 77%humidity, summer to winter
Engineered oak sits in your house first, so it moves with your air.
- 33 inof rain a year
More rain than the valley: waterproof LVP for entries and mudrooms.
Installing floors in Cameron Park homes
Cameron Park grew out of Larry Cameron's 1950s land purchase: ranch land, then Cameron Airpark Estates in 1963, a man-made lake, a golf course and houses. 55% of its 7,821 homes date from the 1970s and 1980s.
It sits in the foothills above the valley: about 14 frosty nights a year and about 33 inches of rain, more than Sacramento, though summers still pass 100°F on about 22 days.
In 41% of households someone is 65 or older. One continuous floor with no thresholds and an attached pad suits single-level living.
Cameron Park is unincorporated, so El Dorado County rules apply: replacing a floor covering needs no permit.
Cameron Park flooring questions
Do I need a permit to replace flooring in Cameron Park?
No. Cameron Park is unincorporated, and El Dorado County's building rules list painting, papering, tiling, carpeting, cabinets, counter tops and similar finish work as exempt. Architectural review covers exterior work, not floors.
How much does it cost to install 1,000 sq ft of flooring in Cameron Park?
With our rates and carpet coming out: about $7,090 for LVP, $7,320 for laminate and $13,160 for engineered hardwood, including material, installation, baseboard, transitions, haul-away and delivery. 2,000 sq ft of LVP replacing builder tile runs about $19,880. The final number comes from the measure.
Do you remove the old floor?
Yes. Carpet and pad, sheet vinyl, LVP and laminate come out at $0.50 per sq ft; tile is $3.50 per sq ft. Haul-away is $150 per truckload of about 600 sq ft.
How much do I pay up front?
Nothing on the website. For installation, California caps the down payment at $1,000 or 10% of the contract, whichever is less, and the rest is paid as work is done.
Is LVP a good idea with Cameron Park summers?
Yes, if it is rigid-core and installed with the expansion gap the maker specifies. Floors next to big west- or south-facing glass get the most heat; shades help any floor last.
Get a free quote for your Cameron Park home
Leave a name and a number. We text you to pick a time for the free measure, bring samples of the floors you like, and send the written quote after the visit.